ACMD-6107 lte band 7 duplexer product brief features ? miniature size - 1.6 x 2.0 mm size - 0.90 mm max height - standard 1.6 x 2.0 mm pcb footprint ? high isolation ? high power rating - 33 dbm abs max tx power ? environmental - rohs compliant - halogen free - tbbpa free specifcations ? rx band performance, 2620-2690 mhz, C 20 to +85c - insertion loss: 2.5 db max - rx noise blocking: 48 db min ? tx band performance, 2500-2570 mhz, C 20 to +85c - insertion loss: 3.0 db max - tx interferer blocking: 54 db min applications lte handsets or data terminals operating in the band 7 frequency range. description the avago ACMD-6107 is a highly miniaturized duplexer designed for use in lte band 7 (2500 C 2570 mhz ul, 2620 C 2690 mhz dl) handsets and mobile data terminals. low insertion loss in the tx channel minimizes current drain from the power amplifer, while low rx channel in - sertion loss improves receiver sensitivity. the ACMD-6107 enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. the ACMD-6107 is designed with avago technologies in - novative film bulk acoustic resonator (fbar) technology, which makes possible ultra-small, high-q flters at a frac - tion of their usual size. the excellent power handling ca - pability of fbar bulk-mode resonators supports the high output power levels used in mobile communications ap - plications, while adding virtually no distortion. the ACMD-6107 also utilizes avago technologies ad - vanced microcap bonded-wafer, chip scale packaging technology. this process allows the flters to be assembled into a molded chip-on-board module with an overall size of only 1.6 x 2.0 mm and maximum height of 0.90 mm. the ACMD-6107 is compatible with standard 1.6 x 2.0 mm duplexer pcb footprints. functional block diagram ant port 3 (pin 6) rx port 2 (pin 1) tx port 1 (pin 3)
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2012 avago technologies. all rights reserved. av02-3907en - november 6, 2012 ordering information part number no. of devices container ACMD-6107-blk 100 tape strip or anti-static bag ACMD-6107-tr1 3000 178 mm (7-inch) reel figure 1. package outline drawing. notes: 1. dimensions in millimeters 2. tolerance: x.xx 0.05 mm x.xxx 0.025 mm 3. dimensions nominal unless otherwise noted 4. angles 45 nominal 5. contact areas are gold plated pin 1 mark rx 2.00 0.075 0.825 0.075 tx 1.60 0.075 1.850 top view bottom view side view ant 1 . 4 5 0 gnd gnd gnd gnd gnd (gnd) 0.925 0 . 7 2 5 0.60 (6) (9) (8) (1) (2) (3) (4) (5) (7) pin connections: 1 rx 2, 4, 5, 7, 9 gnd 3 tx 6 ant 8 gnd 0.33 (3x) 0.30 (3x) 0.075 0.050 all around package outline
|
